Filter
Top Products
11
INSTALLATION INSTRUCTIONS
SITE REQUIREMENTS
4.4 All combustible materials must be removed from behind the
appliance. See diagram 6.
4.5 The Linea may be mounted at any height, however, there
must be a minimum clearance of 150mm (6") between the
bottom edge of the appliance and the floor. To achieve this,
the minimum flue height for each front is shown in diagram
7.
5
AR1327
6
AR1328
7
AR1324
VETRO / PLANO DIMENSIONS
Combustible material to be removed around centre
line of flue. Shown as shaded area
MINIMUM HEIGHT OF FLUE FROM FLOOR LEVEL
VETRO / PLANO DESIGNIO