Filter
Top Products
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06)
62
www GarrettCom com
..
4. Ship the package to:
GarrettCom, Inc.
47823 Westinghouse Dr.
Fremont, CA 94539-7437
Attn.: Customer Service
APPENDIX A: WARRANTY INFORMATION
GarrettCom, Inc. warrants its products to be free from defects in materials
and workmanship for a period of three (3) years from the date of shipment by
GarrettCom.
During this warranty period, GarrettCom will repair or, at its option,
replace components in the products that prove to be defective at no charge other
than shipping and handling, provided that the product is returned pre-paid to
GarrettCom.
This warranty will not be effective if, in the opinion of GarrettCom, the
product has been damaged by misuse, misapplication, or as a result of service or
modification other than by GarrettCom.
GarrettCom reserves the right to make a charge for handling and
inspecting any product returned for warranty repair which turns out not to be
faulty.
Please complete the warranty card as this acts as a product registration,
and mail it to GarrettCom within two weeks of your purchase.
APPENDIX B : Internal DC Power Supply Options
B1.0 SPECIFICATIONS FOR MAGNUM 6K16-SERIES SWITCHES, DC
POWER
Magnum 6K16-Series models, for –48V and 24V DC & 125VDC and 5V Power
input
Each Magnum Model 6K16-Series Managed Switch (DC option) requires a DC
power source, for 24VDC, -48VDC and 125VDC option or 5VDC input. The wide
range of power input qualifies this product for use in 24VDC, -48VDC as well as
125VDC or 5VDC environments. The 24VDC, -48VDC or 125VDC or 5VDC power
input provides an Ethernet networking product utilizing a special type of power supply
with a proven high-reliability record to fulfill the DC requirement.
DC Power Terminals: “+”, “
-
”
,
internally floating
GND: Terminal for “earth” or ground wire connection to the 6K16-Series chassis
Input Voltage: 18 to 36 VDC (24VDC)
Input current: 1.2Amps max.(for all RJ-45 ports)
Input current: 2.4Amps max.(for all Fiber ports)
Input Voltage: -36 to -70 VDC (-48VDC)
Input current: 0.8Amps max.(for all RJ-45 ports)
Input current: 1.2Amps max.(for all Fiber ports)