Filter
Top Products
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06)
53
www GarrettCom com
..
(ACT), Link (LK), and FDX or HDX operation.
5.2.5a 6KP6-MT10ST, 4 @100Mb multi-mode FX , MTRJ Small-Form-
Factor and 2@ 10Mb Multi-mode ST-Fiber port
The 6KP6-RJ10ST is a combo module with two different kinds of fiber flavor
with two different speeds. The top four ports of MTRJ Small form factor fiber support at
100Mb full-duplex, whereas the bottom two ports multi-mode ST-Fiber support 10Mb
half-duplex. This combo module provides more flexibility to the user to connect their
legacy 10Mb fiber as well as 100Mb to the Magnum 6K16-Series Switch.
When installed in a Magnum 6K16-Series Switch, the 100Mb MTRJ connector
supports fiber optic cable distances up to the IEEE-standard 100Mbps distance limits,
i.e., typically 2km at full-duplex and 412m at half-duplex. The 10Mb Multi-mode ST-
Fiber connector supports the standard fiber optic distance limit of 2Km at Full and Half-
duplex both.
The functionality of this 100BASE-FX multi-mode 4 port module is
essentially the same as the ST and SC-types. It has the same LEDs per port
indicating port activity (ACT), Link (LK), and FDX or HDX operation
5.2.6 6KP8-45MT, 4@ 10/100Mbps RJ-45 and 4@100Mb multi-mode
FX , MTRJ Small-Form-Factor
The Magnum 6KP8-45MT
Module is a combo module with
copper and fiber (Small Form Factor)
MTRJ type ports. The small size of
MTRJ connectors provides an
advantage of placing more ports on
one module. The 6KP8-45MT is
equipped with 4 10/100 RJ-45 ports
and 4 MTRJ fiber ports.
When installed in a Magnum 6K16-
Series Switch, it supports the
standard distances as mentioned on 5.2.3. and the LEDs also act similarly.
4
3
2 4 6 8
LK LK LK LK
ACT
F/H
ACT
F/H
2
ACT
F/H
ACT
F/H
6KP8-45MT
4 Port@ 10/100Mbps & 4 port @ 100Mbps
Multi-Mode Fiber port
1 3 5 7
10/100
LK
1
F/H
ACT
4
FULL/HALF
1
ACTIVITY
LINK
2
3
10/100