Filter
Top Products
Display: cooling model
TURBO: Push this button on
COOL mode, the air conditioner
goes into powerful cooling
operation. Push again to cancel
the TURBO function (for only
cooling/heating model ).
LOCK iNDiCATOR: LOCK display
is displayed by pushing the LOCK
button. Push the LOCK button to
clear display.
OPERATION MODE indicator:
When press the MODE button, it
shows the current operating mode:
AUTO, COOL, DRY, HEAT (only
cooling/heating model) or FAN
mode.
TRANSMiSSiON INDICATOR:
This indicator flashes one time
when remote controller transmits
signals to the indoor unit.
DiGiTAL DISPLAY AREA: This
area wilt show the set temperature
and, if in the TIMER mode, will
33;'
'-../
@
@
Display: cooling/heating model
show the ON and OFF settings of
the TIMER. If in the FAN mode,
nothing is appeared.
ON/OFF INDICATOR: This symbol
appears when the unit is turned on
by the remote controller, and
disappear when the unit is turned
off.
FAN SPEED INDICATOR: Press
the FAN SPEED button to select
the desired fan speed setting
(Auto-Low-Med-High).
TIMER DISPLAY iNDiCATOR:
This display area shows the
settings of the TIMER. That is, if
only the starting time of operation
is set, it wilt display the TIMER ON.
If only the turning off time of
operation is set, it will display the
TIMER OFR If both operations are
set, it will show TIMER ON-OFF
which indicates you have chosen
to set both the starting time and
off time.
How the air conditioner works
AUTOMATIC OPERATION
Switch on the power and the
OPERATION indication lamp on the
display panel of the indoor unit starts
flashing, and turns off after flashes for
6 times.
1. Use the MODE button to select
AUTO.
2. Push the TEMP button to set the
desired room temperature. The
most comfortable temperature
settings are between 21C o to
28C.
3. Push the ON/OFF button to start
the air conditioner. The
OPERATION tamp on the display
panel of the indoor unit lights. The
FAN SPEED is automatically set
and there are no fan speed
indicators shown on the display
panel of the remote controller.
4. Push the ON/OFF button again to
stop the unit operation..
COOL/HEAT (Cooling only model
without) and FAN Operation,
If the AUTO mode is not comfortable,
you may manually over-ride the
settings by using COOL, HEAT or FAN
modes.
1. Push the TEMP button to set the
desired room temperature. When in
COOLING mode, the most
comfortable settings are 21 C or
above. When in HEATING mode, the
most comfortable settings are 28 C
or below.
2. Push the FAN SPEED to select the
FAN mode of AUTO, HIGH, MED or
LOW.
3. Push the ON/OFF button, the
operation lamp lights and the air
conditioner start to operate as your
settings. Push the ON/OFF button
again to stop this unit operation.
In the AUTO mode, the air
conditioner can logically choose the
mode of COOL, FAN and HEAT by
sensing the difference between the
actual ambient room temperature and
the set temperature on the remote
controller.
The FAN mode can not be used to
control the temperature. While in this
mode, only steps 2 and 3 may be
performed.