Filter
Top Products
Page 10 Page 11
remote control
Remote Control
TIP: When using the remote
control to enter password
and camera titles, select the
field using the navigation
buttons, press ENTER, and then press the
number buttons.
Remote Control Operation
The remote control is the secondary input device for navigating the system’s
interface. In device operation, the enter key has the same function as “left
click” of the mouse.
Item functIon descrIptIon
1
STANDBY Press to turn standby mode ON/OFF
2
LOGIN/LOCK
If “Security” has been enabled in the setup menu, press
to open the user password login screen.
3
Number/Channel
Buttons
While in menus, press buttons 0~9 to enter values; In
Live View, press 1~4 to view channels in full-screen
4
Window
Display
Press to show quad display
5
MENU Opens the main menu
6
PTZ Press to open the PTZ control window
7
EXIT Close menu windows
8
Navigation/
OK
In menus, press to confirm selections; in PTZ mode,
press to change the navigation buttons to control the
connected PTZ camera (not included)
Press to move cursor up; in PTZ mode, press to pan
camera up
Press to move cursor down; in PTZ mode, press to pan
camera down
Press to move cursor left; in PTZ mode, press to pan
camera left
Press to move cursor right; in PTZ mode, press to pan
camera right
9
+ / - In menus, press to adjust values
10
RECORD Press to start manual recording
11
STOP Press to stop manual recording
12
EXTRA For future use
13
Playback
Controls
Increase reverse playback speed 2X, 4X, 8X
Press to freeze playback to one frame, then press again
to advance frame-by-frame
Press to start playback
Press to slow playback speed by 1/2, 1/4, 1/8
Press to increase forward playback speed 2X, 4X, 8X
product overvIeW
remote control
product overvIeW
mouse and virtual keypad
Mouse Operation with this DVR
The mouse is the primary input device for navigating system menus.
NOTE: Unless otherwise noted, all system functions described in
this manual are achieved through mouse input.
To use a mouse with the system:
Connect a USB mouse to the USB MOUSE port on back panel of the
system.
NOTE: Only the USB 2.0 port on the front panel is designed for data
backup to a USB flash drive. Do not connect a USB flash drive to
the USB MOUSE port or vice versa.
Use the mouse buttons to perform the following:
1
Left-Button:
• Click to select a menu option
• During live viewing in split-screen double-click on a channel
to view the selected channel in full-screen
• Double-click the channel again to return to split-screen view
• Selecting letter or number on the virtual keypad
2
Right-Button:
• Click to open the Quick Access Menu
• Exits any window
• Exits any menu or re-opens previous menu
3
Scroll-Wheel:
• Not used
mouse controls
2
1
Mouse Button Operation
3
vIrtual keypad
Virtual Keypad
To enter text or numerical data, the system uses a virtual
keypad. In fields where letters or numbers can be entered, you
can switch between various formats – numbers, upper case
(ABC) and lower case (abc) and Symbols. See below.
Numbers
Letters-Uppercase
Letters-Lowercase
7
2
1
11
6
54
3
8
9
10
9
12
13
DVR Back
Connect Mouse
DVR Front Face
Connect USB Drive
Symbols
Battery Replacement -
Instructions for Use
Always purchase the correct
size and grade of battery most
suitable for intended use. Re-
place all batteries of a set at
the same time. Clean the battery contacts
and also those of the device prior to battery
installation. Ensure the batteries are installed
correctly with regard to polarity (+ and -). Re-
move batteries from equipment that is not to
be used for an extended period of time. Re-
move used batteries promptly.