Filter
Top Products
ULTRA FLAME DV “0” Clearance Fireplace
GENERAL INFORMATION
The ULTRA FLAME DIRECT VENT GAS FIREPLACE is a high-efficiency free-standing
gas appliance with a maximum input rating of 30 000 Btu/h with natural gas or 26,000 Btu/h
with propane. It features a thermostatic modulating valve and a constant pilot. This means that
you can set the height of the flame to your liking by turning the adjusting knob. An optional
thermostat is also available for automatic room temperature control. The valve is also
independent of any exterior electrical supply. Your appliance will therefore continue to heat your
house in the event of a power failure.
For increased efficiency, we offer as an option a 200 CFM blower with speed control and
thermo-switch. Your blower will therefore turn itself on or off automatically if you desire.
Read these instructions and consult your local building authorities before installing this
appliance. Install the unit and its venting system only as described in these instructions.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
This gas fireplace has been tested by Intertek Testing Services according to CGA-2.22-M96 and
CAN/CGA-2.17-M91 for Canada and ANSI Z21.50-1996 and UL307B-1995 for USA.
It is mobile home approved. This appliance must be installed in accordance with the current
Standard Mobile Homes, CAN/CSA Z240 MR OR CAN/CSA Z240RV, RECREATIONAL
VEHICLES or with the Manufactured Home Construction and Safety Standard, Title 24 CFR,
Part 3280, or when such a standard is not applicable, the current Standard for Fire Safety
Criteria for Manufactured Home Installations, Sites, and Communities, ANSI/NFPA 501A or
with the current Standard for RECREATIONAL VEHICLES, ANSI A119.2/NFPA 501C.
The unit can be installed in a range of altitude from 0 to 4 500 ft (0-1 370 m) in Canada. In USA
see gas codes for operating above 2000 ft.
This appliance must be connected to a venting system.
Use only with Drolet Direct Vent Kit, supplied by manufacturer.
3