Filter
Top Products
ULTRA FLAME DV “0” Clearance Fireplace
LOUVRE INSTALLATION
The kit includes 2 louvres (black or gold) and four #8 x 1 inch machine screws and nuts.
1) Put 1 machine screw on left side of the louvre, as shown on drawing
2) Put the other screw on right side holding it tight with the nut.
3) Insert the left screw into the fireplace frame.
4) Align the right screw to the other frame hole and screw on.
5) Hook the two supports to the 1/4 inch diameter machine screws which are already
inside the fireplace frame.
25