Cloudmark 3048 Home Security System User Manual


 
Cloudmark Cartridge Installation and Administration Guide Appendix A
46 ERROR log messages
Value <val> for “enable micro-updates” must be yes/no/1/0--
keeping downloads enabled. This message is logged at startup when the
value for “enable micro-updates” in cartridge.cfg is not a yes/no-style value.
Can not start networking subsystem (<net_error>), expect network
operations to fail This error is logged on Windows platforms when the
cartridge could not initialize networking via WSAStartup().
Invalid http proxy <proxy> (<error>), not using a http proxy.
Examples include “must be of the form host:port”, “port must be in the range 1-
65536”, etc. This message is logged at startup when the value for “http proxy” in
cartridge.cfg is invalid.
Invalid http basic auth <auth> (<error>), not using authentication for
http proxy A string describing why the authentication specification is invalid.
Invalid micro-update timeout <timeout>, using default timeout of 60
seconds. This message is logged at startup when the value for “micro-update
timeout” in cartridge.cfg is not a positive integer.
Could not shut down networking subsystem (<net_error>) This
message is logged on Windows platforms when the cartridge could not shut
down networking via WSACleanup().
Can not start thread for background loader. Will only use local micro-
update files. This message is logged at startup if the background task that
periodically updates micro-update files from the network and disk could not be
started. Cartridge accuracy will be significantly reduced without current micro-
update files, so the problem should be identified and solved as quickly as
possible.
Could not encrypt statistics report (error <encrypt_errnum>), will not
send report This message is logged when there is a problem encrypting a
statistics report. If this message occurs, the statistics report will not be sent to
Cloudmark.
Could not encode encrypted statistics report, will not send report
This message is logged when there is a problem encoding the encrypted contents
of a statistics report. If this message occurs, the statistics report will not be sent to
Cloudmark.