Filter
Top Products
during Programming, Logic Sensor II Adjustment, Space Shield III Adjustment, Real Time
System Verification or any other system set-up function.
The Buttons used to control those features will remain as they are described in this manual,
regardless of how the Transmitter is set up to arm and disarm the system.
Two Car Operation
To use a single transmitter to operate multiple vehicles, the Transmitter can be set to arm Car
#1 with Button 1 and arm Car #2 with the first available Button not being used by Car #1, which
will be Mode, Mode, 1 if Car #1 is using Auxiliary functions 1 through 3.
The Auxiliary functions for Car #2 will follow the arm/disarm button in sequential order.
As stated, the Programming and set-up functions of Car #2’s system
will not
be affected by this
Transmitter configuration and will operate exactly as described described in this manual.
MS8200 / MS8300 Installation Manual - Page 15
ARM
Aux 1
Aux 2
greennone
Aux 3
ARM
orange
Aux 1 Aux 3
Aux 2
red
BUTTON 1
BUTTON 2
MODE BUTTON
LED color
Mode Button Sequence
None:Green:Orange:Red:Green:...
(A)
(A)
(A)
(A)
(B)
(B)
(B)
(B)
A = Car 1
B = Car 2
installation_rev3.qxd 7/26/99 6:07 PM Page 15