Filter
Top Products
Copyright 2000 Bryant Heating & Cooling Systems
CL-1
CATALOG NO. 5354-805
CUT ALONG DOTTED LINE
CUT ALONG DOTTED LINE
START-UP CHECKLIST
(Remove and Store in Job File)
I. PRELIMINARY INFORMATION
MODEL NO.:_______________________________________
DATE: _____________________________________________
UNIT NO.: _________________________________________
SERIAL NO. ___________________________________________
TECHNICIAN: _________________________________________
JOB LOCATION: _______________________________________
JOB NAME:____________________________________________
II. PRE-START-UP (insert checkmark in box as each item is completed)
VERIFY THAT CONDENSATE CONNECTION IS INSTALLED PER INSTALLATION INSTRUCTIONS
CHECK ALL ELECTRICAL CONNECTIONS AND TERMINALS FOR TIGHTNESS
CHECK THAT RETURN (INDOOR) AIR FILTERS ARE CLEAN AND IN PLACE
VERIFY THAT UNIT INSTALLATION IS LEVEL
CHECK FAN WHEEL AND PROPELLER FOR LOCATION IN HOUSING/ORIFICE
AND SETSCREW TIGHTNESS
CHECK PULLEY ALIGNMENT AND BELT TENSION PER INSTALLATION INSTRUCTIONS
ENSURE BELT TENSION AND BLOWER PULLEYS ARE PROPERLY ALIGNED
III. START-UP
ELECTRICAL
TEMPERATURES
PRESSURES (Cooling Mode)
VERIFY THAT 3-PHASE SCROLL COMPRESSOR IS ROTATING IN CORRECT DIRECTION.
VERIFY REFRIGERANT CHARGE USING CHARGING CHARTS ON PAGES 32 AND 33.
SUPPLY VOLTAGE L1-L2 L2-L3 L3-L1
CIRCUIT NO. 1 COMPRESSOR AMPS L1 L2 L3
CIRCUIT NO. 2 COMPRESSOR AMPS L1 L2 L3
INDOOR FAN AMPS L1 L2 L3
OUTDOOR-AIR TEMPERATURE DB (dry bulb)
RETURN-AIR TEMPERATURE DB WB (wet bulb)
COOLING SUPPLY AIR DB WB
REFRIGERANT SUCTION, CIRCUIT 1 PSIG ° F
REFRIGERANT SUCTION, CIRCUIT 2 PSIG ° F
REFRIGERANT DISCHARGE, CIRCUIT 1 PSIG ° F
REFRIGERANT DISCHARGE, CIRCUIT 2 PSIG ° F