Filter
Top Products
60
BUTTON SEWING
M
1. Raise the presser foot lever and slide the feed dog adjustment
lever to the right to lower the feed dog. ( )
1 Feed dog adjustment lever
Caution
Before starting always turn the hand wheel to check to make sure the needle isn't hitting the
button. If the needle hits the button while sewing, it could break and cause injury.
1
1 Zig zag
2. Attach button sew-on foot (sold separately).
3. Select the . Place the button under the presser foot. Match
up needle position with button holes. Lower the foot.
4. Turn the hand wheel slowly to make sure the needle enters
the button holes without hitting the button. Sew about ten
stitches and you're ready for the next button.
CAUTION
Adjust stitch width if needle doesn't pass through both button
holes.
(Option)