Filter
Top Products
103
ERROR MESSAGES
Warning messages
A warning buzzer will sound and error message flash on your screen if the “START/STOP” or “REVERSE
STITCH” button are pressed when the machine is not properly set up, or operated incorrectly. Please read
the error message and follow instructions carefully. The following is a list of the machine's error messages
and what each means. Please use this list for reference. (The error message will disappear from your screen
once the problem is corrected.)
Make sure the thread is
not tangled around the
needle and that the nee-
dle is not bent.
This message is dis-
played when the machine
finds that the upper thread
is cut. If thread breaks,
rethread the machine.
* This message may also be
displayed when upper
thread tension is set ex-
tremely low.
This message is dis-
played during embroidery
mode if you push the
“START/STOP” button
without first lifting presser
foot when changing
threads.
If you are not changing
threads, just raise and
lower the presser foot to
begin sewing again.
This message is displayed
when the “START/STOP”
or “REVERSE STITCH”
button is pressed while
the presser foot or embroi-
dery foot is raised.
This message is dis-
played if the “
” key is
touched while there is no
memory card inserted
into the slot.
This message is dis-
played when trying to re-
trieve a pattern from a
memory card and that
memory card is not in-
serted.
This message is dis-
played when the “
”
key is touched while a
memory card that cannot
be read by this machine
is inserted.
The Following Memory Cards
Are Not Compatible With This
Sewing Machine
* Quilt work (No.22)
* White Embroidery (No.23)
* Cards that are especially de-
signed for use with other
machines.
This message appears
when you attempt to save
a pattern that cannot be
saved.