49
5. Press the “START/STOP” button to star t the machine, while
gently holding the end of the upper thread.
* Gently, feed the fabric by hand.
* The machine will stop with a reinf orcement stitch automati-
cally after sewing is completed.
* Use a courser stitch density when se wing on heavyweight
fabrics and other difficult f abrics.
3
5
6. Insert a pin in front of the inside edge of both bar tac ks. Insert
the seam ripper into center of b uttonhole . Cut to wards the first
pin. Then cut to ward the other pin.
1 Pin
Order of one cycle
1 2 3 4 5
1 2 3 4 5
7 8
1 2 3 4 5
6
6 7 8 9
*
*
*
* Reinforcement stitch