Filter
Top Products
No. Parts Name Parts Code
1 Cleaning brush XA4527-001
2
Needle set
X59535-001
75/11 3pcs., 90/14 1 pc.
3 Screwdriver X53666-001
4 Scissors 184783-001
5 Seam ripper X54243-001
6 Bobbins (4 pcs) *****
7 Spool cap (Small) 130013-003
8 Spool cap (Large) 130012-003
9 Embroidery sheet (Regular) XA3728-001
10 Embroidery frame (Regular) X58739-003
11 Machine cover (soft type)* X59351-001
12 Extra spool pin** 130920-051
13 Net*** 127610-000
14 Machine cover**** XA0181-051
6
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)
ACCESSORIES
* When placing the machine cover on the
machine while the embroidery frame is still
attached, touch “CHARACTERS &
DESIGNS” or “CARD” to return the
embroidery arm to it
’s storage position. An
alternate method to return the embroidery
arm to it’s storage position would be to turn
the machine off and then turn it on again,
allow the arm to re-set itself and then turn off
the machine.
A cover might not be provieded in some
countries.
** An extra spool pin should be used for
decorative thread such as metallic thread.
*** If using special threads which wind quickly
off the thread spool, attach a net to the spool
before using.
**** In some countries, the No. 14 machine cover
is supplied as an accessory in place of the
No. 11 machine cover (soft type).
*****Distributed in sets of 10 when ordered
separately.
(Parts Code)
USA and Canada: XA3811-051
Other countries: XA3812-051
12
34
56
78
910
11 12
13 14