Filter
Top Products
71
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)
5. Use the arrow keys to move the needle to the
embroidery start position, and then start
embroidering.
a
c
6. Move the frame to the place indicated by “c”
and clamp it again with the carriage.
7. Embroider the next pattern. If using the same
pattern, go straight ahead and start
embroidering. If using a different pattern,
select the new pattern.
After touching “LAYOUT”, touch “90°
clockwise” to change the arrow in the display
so that it points to the right. Then touch
“START/CENTER” to set the current needle
position as the embroidery start position.
8. Use the arrow keys to move the needle to the
previous embroidery end position, and then
continue embroidering.
1 Previous embroidery end