Filter
Top Products
51
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)
Combining a frame pattern with a design
1. Select a frame pattern and embroider it.
A “+” mark is sewn after embroidering of the frame pattern in
the center of pattern. This mark can be used as a guide
when embroidering characters or patterns to position them
within the frame pattern.
2. Using the “+” mark inside the frame pattern as a guide, align
the needle using the center needle layout function.
Embroider the design.
Making badges or decorative patches
1. After embroidering a frame pattern and the combined
design, sew an extra frame pattern on the outside using the
“– – –” stitch slightly larger than the original frame pattern.
2. Cut cleanly around the frame pattern, following the line of
the outside pattern.
The finished badge or decorative patch is now ready
to be attached to a project.
EMBROIDERING APPLICATIONS