Filter
Top Products
38
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)
1 This indicates the order of color changes.
2 Touch this key to display the total time required for embroidering the pattern and the time remaining
until the pattern is finished. The time taken to change the threads is not included in these times. (The
time is calculated after the key is touched, and is then displayed.) (Refer to page 39.)
3 Touch this key to switch between the multicolor mode and single-color mode. (It is not possible to
change between multi color mode and single color mode if “MULTI COLOR” is not displayed on the
screen).
4 Touch this key if you would like to change the pattern position, or if you would like to use the Help
function.
To change the pattern position: (Refer to page 43)
To use the Help function: (Refer to page 54)
5 Touch this key to change the size of the pattern. (It is not possible to change the size of patterns if
“L/S” is not displayed on the screen.)
6 Touch this key to return to the pattern selection screen.
7 The total number of colors and the number of the color currently being sewn will be displayed.
8 Touch this key to change the display in 1 to the color name (reference). (Refer to page 39.) ( It is not
possible to display the color name if “THREAD COLOR” is not displayed on the screen.)
Screen A
2 3 4 5 6
1
7
8