Filter
Top Products
Displaying the embroidery time for one-point patterns
If you would like to know the time it takes to
embroider a pattern, touch the time display key
(“XXXX”). The time required will then be
calculated and displayed. The time taken to
change the threads is not included.
This function can also be used with some of the
patterns on the memory cards, but in such cases
the time displayed may be somewhat different
from the time given on the pattern sheet for that
memory card.
1. After selecting the pattern, touch “XXXXX”.
1 Time display key
2. The embroidering time will then be calculated.
2 Touch this key to cancel the calculation.
3. The required time and the remaining time will
be shown on the display.
3 Remaining time
4 Total required time
4. The time remaining will change at the end of
each color embroidery.
Displaying the color names for one-point patterns
If you touch “THREAD COLOR”, the color names
(reference) of the different threads to be used will
be displayed in order.
1. After selecting the pattern, touch “THREAD
COLOR”.
1 “THREAD COLOR” key
2. The color names will then be displayed.
* If you touch “THREAD COLOR” once more,
the display will return to the previous screen.
* It is not possible to display the color name if
“THREAD COLOR” is not displayed on the
screen.
1 “BASIC OPERATION” key
1
1
1
3
4
2
1 “BASIC OPERATION” key
1
39
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)