Filter
Top Products
BAS-311H
CONTENTS
1. NAMES OF MAJOR PARTS ................ 1
2. SPECIFICATIONS ................................ 2
3. INSTALLATION.................................... 3
3-1. Table processing diagram ................................ 4
3-2. Installing the control box................................... 5
3-3. Installing the oil pan.......................................... 5
3-4. Installing the machine head.............................. 6
3-5. Installing the operation panel............................ 9
3-6. Installing the two-pedal foot switch .................10
3-7. Connecting the cords........................................10
3-8. Connecting the ground wire..............................13
3-9. Connecting the power cord............................... 14
3-10. Installing the cotton stand...............................17
3-11. Installing the pneumatic unit
(pneumatic work clamp specifications).............18
3-12. Installing the eye guard ..................................19
3-13. Installing the side cover and rear cover..........19
3-14. Lubrication...................................................... 20
3-15. Installing the machine head fixing bolt ........... 21
3-16. Checking the machine head switch................21
4. PREPARATION BEFORE SEWING.....22
4-1. Installing the needle.......................................... 22
4-2. Threading the upper thread..............................22
4-3. Winding the lower thread.................................. 24
4-4. Installing the bobbin case.................................25
4-5. Thread tension.................................................. 26
4-5-1. Lower thread tension ...........................26
4-5-2. Upper thread tension ...........................26
4-6. Starting up ........................................................ 27
5. USING THE OPERATION PANEL
(BASIC OPERATIONS) .......................28
5-1. Name and function of each operation
panel item .........................................................28
5-2. Program setting method....................................30
5-2-1. Parameter list .......................................31
5-2-2. Using the lower thread counter ............33
5-2-3. Using the production counter ...............34
5-2-4. Split number setting method ................35
5-3. Copying programs.............................................36
5-4. Checking the sewing pattern.............................37
5-5. Setting the work clamp lift amount....................38
6. USING THE OPERATION PANEL
(ADVANCED OPERATIONS) ..............40
6-1. Setting memory switches..................................40
6-2. List of memory switch settings..........................41
6-3. Using cycle programs .......................................43
6-4. Direct selection..................................................46
6-5. Resetting all settings to their defaults...............47
7. USING SD CARDS...............................48
7-1. Notes on handling SD cards
(commercially available)...................................48
7-2. Structure of an SD card folder ..........................48
7-3. Preparation for reading and writing data...........49
7-4. Reading additional sewing data........................50