Filter
Top Products
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
BAS-311H
45
<Method of use>
When a cycle program has been recorded, the cycle program number is displayed after the program number when a program
number is selected.
1. Press the or key (1) to select the cycle program
number that you would like to use.
・ The cycle program number is displayed in the
PROGRAM No. display, the step number is displayed in
the TENSION display, and the parameter for that step is
displayed in the menu display (2).
・ When you press the SELECT key, the menu display (2)
and the menu indicator (3) are switched, so that you can
check the program parameters for that step.
2. Carry out sewing while referring to “8. Sewing”.
・ The recorded programs are carried out in the order of
the steps, and when the last step is completed, sewing
returns to the first step.
・ If you press the
or key, you can return to the
previous step or skip to the next step respectively. (You
do not need to carry out home position detection again.)
*
When memory switch No. 405 is set to OFF, the display of cycle programs can be turned off (skipped).
3105B
3106B
2382B 2383B
Step No.
Program paramete
r
for step 1