Brother 885-V95/V96/V97/V98 Sewing Machine User Manual


 
Sewing the Various Built-in Decorative Patterns 125
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Realigning the pattern
The pattern may not be sewn correctly, depending on
the type of fabric being sewn or the sewing speed. If
this occurs, adjust the pattern while sewing on a
piece of scrap fabric that is the same as that used for
your project.
Memo
z Only the eyelet stitch in the utility stitches,
cross-stitches, and character stitches can be
adjusted using the pattern alignment stitch.
a
a
Attach monogramming foot "N".
For details, refer to "Replacing the presser
foot" (page 43).
b
Press (Utility stitch key) on the
operation panel, and select (Decorative
stitch).
X The screen containing the various decorative
stitches appears.
c
Select .
X The pattern alignment stitch is selected.
d
Start sewing.
X The pattern for making the adjustment is
sewn.
X The sewing machine stops after sewing the
pattern has finished.
e
Check the sewn pattern.
If the part of the pattern indicated in the
illustration is sewn uniformly, the pattern is
correctly aligned.
If the pattern is not sewn correctly, follow the
steps below to adjust the sewing.
f
Press (Settings key) on the operation
panel.
X The settings screen appears.
g
Press for vertical pattern
adjustment.
X Make the necessary adjustments according
to how the pattern is sewn.
Press to increase the vertical space in the
design.