Filter
Top Products
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
5
No. Part Name
Part Code
U.S.A./
Canada
Others
1 Buttonhole foot “A” X57789-151
2 Embroidery foot “W” XC8156-451
3 Overcasting foot “G” XC3098-051
4 Monogramming foot “N” X53840-351
5 Zipper foot “I” X59370-051
6 Zigzag foot “J” (on machine) XC3021-051
7 Blind stitch foot “R” X56409-051
8 Button fitting foot “M” 130489-001
9 Walking foot SA140 F033N:XC2214-102
10 Side cutter foot SA177 F054:XC3879-002
11 Free-motion quilting foot SA129 F005N:XC1948-002
12 Straight stitch foot SA167 F042N:XC1973-102
13 Seam ripper X54243-001
14 Bobbin × 10 SA156 SFB:XA5539-151
15 Needle set X58358-051
16 Twin needle X59296-151
17 Ball point needle set XD0705-051
18 Scissors XC1807-121
19 Chalk pen 184944-001
20 Cleaning brush X59476-051
21 Eyelet punch 135793-001
22 Screwdriver (large) X55467-051
23 Screwdriver (small) X55468-051
24 Spool cap (small) 130013-154
25 Spool cap (medium) × 2 X55260-153
26 Spool cap (large) 130012-054
27 Vertical spool pin XC8619-051
28 Spool felt X57045-051
29 Disc-shaped screwdriver XC1074-051
30 Spool net XA5523-050
31 Embroidery frame set (small)
H 2 cm × W 6 cm
(H 1 inch × W 2-1/2 inches)
SA437 EF73:XC8479-052
32 Embroidery frame set
(medium) H 10 cm × W 10 cm
(H 4 inches × W 4 inches)
SA438 FE74:XC8480-052
33 Embroidery frame set (large)
H 18 cm × W 13 cm
(H 7 inches × W 5 inches)
SA439 EF75:XC8481-052
34 Embroidery frame set (extra
large) H 30 cm × W 18 cm
(H 12 inches × W 7 inches)
SA440 EF76:XC8482-052
35 Foot controller XD0500-051 (EU area)
XC8028-051 (other area)
36 Embroidery needle plate
cover
XA9939-051
37 Grid sheet set SA507 GS3:X81277-001
38 Touch pen (stylus) XA9940-051
39 Knee lifter XA6941-051
40 USB cable XC8897-051
41 Bobbin case (pink screw) XC8167-151
42 Straight stitch needle plate XC8362-051
43 Cord guide bobbin cover (with
single hole)
XC8449-051
44 Embroidery bobbin thread SA-EBT EBT-CEN:
X81164-001
45 Stabilizer material SA519 BM3:X81175-101
46 Operation manual XC8170-151
47 Quick reference guide XC8173-051
48 Embroidery unit carrying
case
SA529 D6EUC:
XC9862-052
49 Hard case XC7750-051
Memo
(For U.S.A. only)
Foot controller: Model S
This foot controller can be used with this
machine model Innov-ís4000D/NV4000D.
Memo
• Always use accessories recommended for
this machine.
• The screw of the presser foot holder is avail-
able through your authorized dealer (Part
code XA4813-051).
• Included accessories 35, 46, and 47 can be
stored in the machine’s hard case.