Filter
Top Products
EDITING STITCH PATTERNS
106
Changing the Size
Select a stitch pattern, then press to change the size of the stitch pattern. The stitch pattern will be
sewn in the size highlighted on the key.
Actual Stitch Pattern Size
h Single/Repeat sewing
key
Press this key to choose single stitches or continuous stitches. 107
i Elongation key When 7mm satin stitch patterns are selected, press this key to choose from 5
automatic length settings, without changing the stitch zigzag width or stitch
length settings.
107
j Size selection key Use this key to select the size of the stitch pattern (large, small). 106
k Thread density key After selecting the stitch pattern, use this key to change the thread density of the
pattern.
108
l Delete key When you make a mistake selecting a stitch pattern, use this key to delete the
mistake. When you make a mistake in combining stitch patterns, use this key to
delete stitch patterns.
100, 101
m Memory key Use this key to save stitch pattern combinations. 118-119
n Stitch width and stitch
length key
Shows the stitch width and stitch length of the selected stitch pattern. The
machine has default settings.
42-43
o Thread tension key Shows the thread tension setting for the selected stitch pattern. The machine
has default settings.
43
Memo
• If you continue entering stitch patterns after changing the size, those patterns will also be sewn in that
size.
• You cannot change the size of combined stitch patterns once the stitch pattern is entered.
No. Display Key Name Explanation Page
LS
LS