Filter
Top Products
DCN Next Generation Multi Voting en | 12
Bosch Security Systems B.V. | 2005 September | 9922 141 70392
0001 to 9999 and must be unique. If it is not, a
warning message will appear when you attempt to
insert the edited voting back into the ‘Current’ list,
and the insertion will not take place. To edit the
voting number:
• Click on the ‘Number’ edit field.
• Type in the required voting number.
i Tip
You can also use the up and down buttons to
the right of the edit field to access the next
highest or next lowest available voting number.
i Note
The next voting number appears after you insert
a voting.
Voting name
This name appears in the ‘Current’ list. The
maximum length of a voting name is 20 characters.
To edit the voting name:
• Click on the ‘Name’ edit field.
• Type in the required voting name.
Voting kind
This describes the type of voting. Six different kinds
of voting are possible in Multi Voting:
• Parliamentary voting
• For/Against voting
• Audience Response voting
• Rating
• Multiple Choice voting
• Opinion Poll voting
For more information about voting types and
options, please refer to paragraph 1.1.1
The ‘Kind’ drop-down list box - where the
description is selected – contains the six choices. To
select the voting kind:
• Use the up and down arrow keys to view the
choices.
• Click on the required selection.
Voting description
This is text that describes the voting. The voting
description can appear on hall displays and LC
displays of delegate units. The ‘Subject’ edit field -
where the description is entered - contains four text
lines. To enter or edit a voting description:
• Click on the ‘Subject’ edit field.
• Type in the required voting information.
3.3.1 Voting answers
You can specify the number of answer options, the
LCD text and the answer text, which will form each
voting option in the current voting.
Answer text cannot be displayed on delegate units
and can only be specified for Multiple Choice and
Opinion Poll voting. To select the number of
answers:
• Click on the ‘Answers’ push button in the
Preparation window.
The ‘Answers’ dialogue box will appear:
Figure 11 The ‘Answers’ dialogue box
To specify the number of answer options:
• Select the ‘Number’ edit field and type in the
required value.
The up and down arrow buttons on the right-hand
side of this field can be used to scroll to the required
number.
i Note
If the voting kind is For/Against voting or
Audience Response voting, the number of
answers is selected automatically by the
system.
You can specify the LCD text, which is the text that
will appear on delegate units. The options available
will vary according to the voting kind. To do so:
• Select the ‘LCD’ drop-down list box.
• Click on the required option.
For Multiple Choice and Opinion Poll voting, it is
possible to specify answer text for answer options.
Each answer option is displayed as a text edit field in
the ‘Answer’ display area. If legend text has been