Filter
Top Products
10 en | Inserting the Language Tab Remote Command Center
F.01U.078.098 | 3.0 | 2011.11 Installation and Operation Guide Bosch Security Systems, Inc.
Figure 5.2 Position of Mounting Screws and Earth Ground Screw
When the device is powered on, the system performs a selftest. The routine includes checking
of all interfaces, address switches, LEDs, LCD, buzzer, keys, current consumption, and lamp
test.
5.3 Removing the Cover Frame for Service
6 Inserting the Language Tab
For different language versions of LED and key lettering, use the tabs provided with the
FMR-1000-RCMD.
Figure 6.1 Inserting the Language Tab
1. Insert the tab carefully in the slot at the top of the keypad.
2. Slide the tab down carefully until it is completely flush with the keypad.
3. For tab removal, carefully pull upwards at the strap.
For removing the device’s cover
frame when the annunciator unit
is already mounted, insert a
small flathead screwdriver in
each slot at the bottom or at the
top of the frame. Press up and
pull the cover frame off.
Figure 5.3 Removing the Cover Frame (after Installation)
Gas Alarm
Silenced
Power
Trouble
Fire
Supervisory
Gas Alarm
Silenced
1
2
Gas Alarm
Silenced
Power
Trouble
Fire
Supervisory
Gas Alarm
Silenced
Power
Trouble
Fire
Supervisory
3