Filter
Top Products
8 en | Mounting Remote Command Center
F.01U.078.098 | 3.0 | 2011.11 Installation and Operation Guide Bosch Security Systems, Inc.
Before mounting the unit, follow the instructions in
– Section 6 Inserting the Language Tab on Page 10
– Section 7 Address Setting on Page 11
– Section 5 Wiring on Page 9.
Figure 4.2 Back Box of the FMR-1000-RCMD Remote Command Center
4.3 Flush Mounting
Legend
1 Knockout for 1/2 in. conduit connector in the in the back, bottom and top side
2 Arrow pointing up
3 Mounting holes for surface mounting
4 Bubble level
5 Fixing points for annunciator unit (4 screws)
5.5 in. (140 mm)
4.41 in. (112 mm)
7.40 in. (188 mm)
3
2
3
4
5
55
5
1
1.02 in. (26 mm)
1.02 in. (26 mm)
1
1
7/8 in. (20 mm)
For flush mounting, use a 3 gang
electrical box. Refer to
Figure 4.3 to select the mounting
holes.
Before mounting the unit, follow
the instructions in
– Section 6 Inserting the
Language Tab on Page 10
– Section 7 Address Setting on
Page 11
– Section 5 Wiring on Page 9.
Figure 4.3 Flush Mounting
Legend
1 Mounting holes for flush mounting
111
111
3.54 in. (90 mm)
3.19 in. (81 mm)
1.82 in.
(46 mm)
1.82 in.
(46 mm)