Filter
Top Products
R5976255
A
TLAS
CS4 (2001-03)
10-5
10.4 Change Projector Address
Every projector requires an individual address between 0 and 255. This address can be software
installed.
To change that address:
! Push the cursor key
up
or
down
to highlight
'Change Projector Address'
.
! Press
ENTER
to display the
Change Projector Address menu
. The actual address will be filled
in.
! The first digit is highlighted. Enter the new projector address with the digit keys on the
RCU
or
the local
keypad
or push the cursor key
left
or
right
to select a digit and change the value by
pushing the cursor key
up
or
down
until the new value is reached. Continue with the other dig-
its in the same way.