Filter
Top Products
R5976255
A
TLAS
CS4 (2001-03)
5-11
5.1.10 5-cable Input Slot (slot 1)
Slot 1 has 5 BNC input terminals.
The following signals can be connected to these BNC connectors:
Connector name R G B H V
Input signal
RGBHV R G B H V
RGBS R G B S -
RGsB R Gs B - -
Composite Video - Video - - -
Super Video - Y - - C
Component Video - SS R-Y Y B-Y S -
Component Video - SOY R-Y Ys B-Y - -
Slot 1 selection
To select slot 1:
! Press the digit button
1
on the RCU or the local keypad.
Configuration of the 5-cable input
The configuration has to be done on the
'Input slot'
menu.
To change the signal format:
! Press
ADJUST
or
ENTER
to start up the
Adjustment
mode.
! Push the cursor key
up
or
down
to select
Installation
! Press
ENTER
.
! Press the cursor key
up
or
down
to select
'Input Slots'
! Press
ENTER
. The internal system will scan the inputs and displays the result in the
'Input
Slots' menu
.
! Push the cursor key
up
or
down
to select the first slot.
! Press
ENTER
key to toggle the input signal priority.