Filter
Top Products
R5976255
A
TLAS
CS4 (2001-03)
8-3
To load a file:
! Push the cursor key
up
or
down
to select the best fitting file.
! Press
ENTER
to select.
A confirm
Load file menu
will be displayed with the newly created file and the one on which
the new file is based on.
! Press
ENTER
to confirm the new creation or
EXIT
to return to the load file menu.
When scrolling through the files, the image will be adapted according to the settings
of the selected file (on line adaptation).
If the displayed image is not correct after selecting the best fitting file, go to the
edit menu
, select
the active file and change the file settings.
During a load file, the actual active file is displayed next to the indication
'Active file'
.
8.1.2 Edit File
The
Edit file menu
makes it possible to change the settings of the file according to the real settings
of the connected source. Consult the source specification before entering the data.
To start up the
EDIT menu
:
! Push the cursor key
up
or
down
to highlight
'Edit'
.
! Press
ENTER
to select.
! The
Edit file adaptation menu
will be displayed.
! Select the file which must be edited (mostly the active file).
! Press
ENTER
.
The file name will be displayed in the upper right corner.
The following items can be adjusted:
! Total quantity horizontal pixels
! Active quantity horizontal pixels
! Horizontal start (in pixels)
! Horizontal period (in µs) (is automatically adapted during the installation of a file with
LOAD
)
! Total vertical lines (is automatically adapted during the installation of a file with
LOAD
)
! Active vertical lines
! Vertical start (in lines)
! Interlaced: toggle on/off (is automatically set to its correct position during the installation of a
file with
LOAD
)
All settings can individually be changed by pushing the cursor key
up
or
down
to select an item.
The color of the selected item will change. There are three methods to change the value.
method 1:
! press
ENTER
to activate the digits
! enter directly with the numeric keys on the
RCU
or local
keypad
the new value