Filter
Top Products
Instruction 3015-4275 65
Optional Accessories
Intake Manifolds
Up to three additional intake manifolds (P/N 3015-3419 & P/N 3015-3411) can be installed in the AGM300 to
increase the total capacity to 16 zones. Each manifold requires a sample line-end filter for each of the 4 zones.
Please follow the instructions provided to install the manifolds. Then follow the instructions earlier in this manual
to install the air lines and complete the zone programming steps. The AGM300 setup must also be updated to
recognize the new zones.
4–20 mA Interface Board
The optional 4–20 mA Interface Board (P/N 3015-3133) (Page 7) allows the operator to take advantage of the
current loop interfaces provided for connection of external devices to the AGM300. The interface board plugs
into the socket provided on the main circuit board, and the external devices are then cabled to the AGM300 as
described on Page
16.