Filter
Top Products
Instruction 3015-4275 21
ADM800 - Mounting Instructions
Screw Locations
The ADM800 should be installed plumb and level and securely fastened to a rigid mounting surface. The
enclosure utilizes keyhole mounting brackets designed for #12 pan head fasteners. Locate the four screws as
shown in the diagram and leave the screw heads protruding approximately 3/16".
ADM800 Mounting Specs
Installation
Hold the display module flat against the mounting surface and allow it to slide down engaging the screw heads
in the keyhole slots of the mounting brackets. Adjust the screws as necessary to hold the unit securely against
the mounting surface.