Filter
Top Products
Page 40 - Function Key Programming Function Keys
Page 40 - Function Keys IP Office 2420 + EU24 User’s Guide
Function Key Programming 40DHB0002UKEG – Issue 4 (9th February 2004)
HGEna - Hunt Group Enable
Sets the extension's membership of a group or groups as enabled. This function does
not take the Hunt Group In/Out of Service.
This function can be programmed with or without a target group number. This function
cannot be programmed through the phone by the user.
If programmed without a group number, pressing
HGEna toggles all the extension's
group memberships to either enabled or disabled. A
is shown next to HGEna
when the group memberships are enabled.
If programmed with a group number, that number is shown next to
HGEna.
Pressing
HGEna will enable the extension's membership of that group. In this
mode the key does not toggle.
When enabled, G is shown on the display and the extension will receive group calls.
[User | Digital Telephony | Advanced | Hunt Group | Hunt Group Enable]
See also:
• HGNS+ - Set Hunt Group Night Service (!) on page 42.
•
HGOS+ - Set Hunt Group Out of Service on page 43.
• HGDis - Hunt Group Disable on page 42.
HGDis - Hunt Group Disable
Sets the extension's group membership as disabled. Used with HGEna - Hunt Group
Enable on page 42. This function does not take the Hunt Group Out of Service.
This function can be programmed with or without a target group number. This function
cannot be programmed through the phone by the user.
If programmed without a group number, pressing
HGDis disables all the
extension's group memberships.
If programmed with a group number, pressing
HGDis disables just the extension's
membership of that group.
[User | Digital Telephony | Advanced | Hunt Group | Hunt Group
Disable]
HGNS+ - Set Hunt Group Night Service (!)
Put a specific hunt group into or out of night service mode.
This function requires the hunt group number to be entered when programmed. The
hunt group number is then shown next to HGNS+. This function can be programmed
through the phone by the user using an
Admin key.
Pressing
HGNS+ puts the hunt group into night service. Group calls then go to its
night service fallback group if set or, if not answered, to voicemail.
[User | Digital Telephony | Advanced | Set | Set Hunt Group In
Service]
HGNS- - Clear Hunt Group Night Service
Returns a hunt group that has been manually put into night service back to normal
service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 42.
This function requires that the hunt group number is entered when programmed. This
function cannot be programmed through the phone by the user.
The hunt group number is shown next HGNS-. Pressing
HGNS- puts the group
back into normal service if in night service.
[User | Digital Telephony | Advanced | Call | Clear Hunt Group Night
Service]