Filter
Top Products
Page 44 - Function Key Programming Function Keys
Page 44 - Function Keys IP Office 2420 + EU24 User’s Guide
Function Key Programming 40DHB0002UKEG – Issue 4 (9th February 2004)
Park - Park (#)
Park calls to and retrieve calls from a specific park slot.
This function requires entry of a park slot number when programmed. That number and
Park then appears next to the
key. This function can be programmed through the
phone by the user using an
Admin 1 key. The user can use the key to park
calls into that park slot and unpark calls from that slot. Parked calls can also be
retrieved with the Ride function (see page 51).
When a call is parked in that park slot by the user, a
symbol appears next to the
key and parked by another user, then Park is underlined.
[User | Digital Telephony | Park]
See also:
• CPark - Call Park (!) on page 33.
• Park - Call Park to Other Extension (!) on page 46.
• Ride - Ride Call on page 51.
Park - Call Park to Other Extension (!)
Allows a call to be parked against another extension. Depending on the other
extension's type, its parked call indication is triggered. Parked calls are retrieved with
the Ride function (see page 51).
This function can be programmed with or without a target extension number. This
function can be programmed through the phone by the user using an
Admin key.
If programmed with a number, the
Park key displays that number. After answering
a call, pressing
Park parks the call against that extension.
If programmed without a number, after pressing
Park the target for the parked call
must be entered.
The parked call is assigned a number based on the parking extensions number. For
example, extension 290's first parked call is numbered 2900, it’s next 2901 if 2900 is
still parked and so on. If not retrieved elsewhere, a parked call will recall to the parking
extension after a set time.
[User | Digital Telephony | Emulation | Call Park to Other Extension]
See also:
• CPark - Call Park (!) on page 33.
• Park - Call Park to Other Extension (!) on page 46.
• Ride - Ride Call on page 51.
PCall - Priority Call
Call a specified target extension even if that extension is set to 'Do not Disturb'.
This function requires the target extension number to be specified when programmed.
The target extension is then shown next to
PCall. This function cannot be
programmed through the phone by the user.
[User | Digital Telephony | Advanced | Call | Priority Call]
PhyEx - Dial Physical Extension by Number
Dial a specified extension regardless of the current logged on user at that extension
and any forwarding, follow me and do not disturb settings applied by the extension
user.
This function requires the target extension number to be specified when programmed.
The target extension is then shown next to
PhyEx. This function cannot be
programmed through the phone by the user.
This function is currently only available on US based systems.
[User | Digital Telephony | Dial | Dial Physical Extension by Number]