Filter
Top Products
FEATURES AND SPECIFICATIONS PAGE 5
Installation Options:
¥ Freestanding
¥ Masonry Fireplace Insert
¥ Zero-Clearance (Metal)
Fireplace Insert
Features:
¥ Works During Power Outages
(millivolt system)
¥ High Efficiency; Up to 80% for Natural Gas,
82% for LP (Steady State)
¥ Optional Thermostat or Remote Control
¥ Realistic "Wood Fire" Look
¥ Convenient Operating Controls
¥ Variable-Rate Heat Output
¥ Quiet Blower for Effective Heat Distribution
¥ Low Maintenance
Heating Specifications:
Approximate Heating Capacity (in square feet)* 600 - 1600
AFUE (Annual Fuel Utilization Efficiency) 68 %
Natural Gas LP (Propane)
High Burn Input Rate (In BTU's) 40,000 38,000
Low Burn Input Rate (In BTU's) 23,000 20,000
Efficiency** 80% 82%
* Heating capacity will vary with the home's floor plan and insulation, natural gas or Propane BTU rating, and outside temperature.
** Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent of installed system.
To measure the net BTU's, multiply the BTU input by the efficiency percentage (80% for natural gas, 82% for LP).
Dimensions
20-1/8"
8" Panels: 28"*
10" Panels: 30"*
12" Panels: 32"*
13"*
5-3/4"*
* Includes
i
23-3/4"
8" Panels: 40"*
10" Panels: 44"*
12" Panels: 48"*
18-5/8"
23-3/4"
Pedestal: 31-1/2"
Brass, Cast Legs: 28"
Black Legs: 26-5/8"
Weight: 175 Lbs.
Measure Clearances
from the Upper Top
The base of the
starter section
is 2" below the
upper top.
4-1/2"
4-1/2"
The base of the starter section
is 2" below the upper top.
Fuel:
The heater is designed either for natural gas or for propane (but not
for both). Check the sticker on the top of the gas control valve.
Emissions:
This unit has passed the ANSI emission standards for vented room
heaters as tested by OMNI Environmental Services, Inc.
Electrical Specifications:
115 Volts, 1.3 Amps, 60 Hz (150 watts on high)