Filter
Top Products
17
Figure 17
ATTACHING COLLECTOR TO MOUNTING BRACKETS
Once all of the mounting brackets have been secured
to the roof insert the channel nut with spring inside the
channel. Then fasten the collector mounting clip to the
nut with the stainless steel bolt using a fl at washer and
lock washer – refer to Figure 17.
To aid in handling the collectors on the roof the collector
mounting clips may be tightened to the lower mounting
brackets prior to raising the collectors. The collector
can then be set on the mounting brackets against the
clip while the top clips are fastened over the lip on the
collector. The bottom clips can then be loosened and
retightened over the collector lip.
Collector Frame
Mounting Clip
Stainless Steel Bolt
(with lock washer &
flat washer)
Channel nut with spring
(one piece part).
Roof
Mounting
Bracket