Filter
Top Products
3
Important Safeguards
Important – In the event the following safety
labels are damaged or destroyed, they must
be replaced to ensure operator safety. For
safety and information replacement labels,
see Parts Illustrations/Lists, Section I, pages
50 and 51.
The "Warning – Hazardous Voltage" label, shown
in Figure 1-2, is attached to the cover of the
electrical box. The label warns service personnel to
unplug the power supply before attempting any
service work on the case sealer.
Figure 1-2 – Electrical Warning Label
Figure 1-3 – Pinch Point Caution Label
This safety alert symbol identifies
important messages in this manual.
READ AND UNDERSTAND THEM BEFORE
INSTALLING OR OPERATING THIS
EQUIPMENT.
The two "Warning – Keep Away From Moving
Belts" labels, shown in Figure 1-1, are located on
the side of the drive belt assemblies at the infeed
end. The labels warn operators and service
personnel to keep hands away from this area when
the drive belts are running.
Figure 1-1 – Hands Warning Label
The "Caution – Pinch Point" label, shown in
Figure 1-3, is attached to the top, infeed end of both
drive belt assemblies. The label reminds operator to
keep hands away from compression rollers when
machine is running.