Filter
Top Products
17
Figure 3-2 – Side Drive Belts
Operation (Continued)
Box Size Set-Up
1. ADJUST DRIVE BELTS (Figure 3-2)
Place a product filled box on infeed conveyor
bed with top flaps folded as shown and
manually move box forward to contact lower
taping head applying roller.
Turn drive belt adjustment crank to position both
side drive belts against sides of box.
CAUTION – If drive belts are allowed
to slip on box, excessive belt wear
will occur.
Push electrical switch "On" to start drive belts.
Move box forward until it is taken away by drive
belts.
If the box movement is jerky or stops, move the
side drive belts in slightly to add more pressure
between the box and drive belts.
WARNING – Be sure all packaging
materials and tools are removed
from the machine before operating.
2. RUN BOXES TO CHECK ADJUSTMENT
(Figure 3-3)
Figure 3-3 – Check Adjustment