Filter
Top Products
7
IMPORTANT SAFEGUARD
IMPORTANT SAFEGUARD
IMPORTANT SAFEGUARD
IMPORTANT SAFEGUARD
5. Tape Width:
Minimum – 36 mm [1-1/2 inches]
Maximum – 48 mm [2 inches]
1. Power Requirements:
Electrical – 115 VAC, 60 Hz, 3.8 A
These machines are equipped with an 2.4 m
[8 foot] standard neoprene covered power cord
and a grounded plug.
Contact your 3M Representative for power
requirements not listed above.
2. Operating Rate:
Belt speed is 0.40 m/s [78 ft/min]
8. Box Board:
Style – regular slotted containers – RSC
Bursting test –125 to 275 P.S.I. single wall or
double wall B or C flute.
7. Tape Leg Length (Standard):
70 mm ± 6 mm [2-3/4 inches ±1/4 inch]
Tape Leg Length (Optional):
48 mm ± 6 mm [2 inches ±1/4 inch]
(To change tape leg length to 48 mm [2 inches],
see "Special Set-Up Procedures", page 23.)
Specifications
(Specifications continued on next page)
3. Operating Conditions:
Use in dry, relatively clean environments at
5
o
to 40
o
C [40
o
to 105
o
F] with clean, dry boxes.
Important – Machine should not be washed
down or subjected to conditions causing
moisture condensation on components.
4. Tape:
Scotch
TM
brand pressure-sensitive film box
sealing tapes.
6. Tape Roll Diameter:
Up to 405 mm [16 inches] maximum on a
76.2 mm [3 inches] diameter core.
(Accommodates all system roll lengths of
Scotch
TM
brand film tapes.)