Filter
Top Products
18
Box Sealing
1. Feed boxes to machine at minimum 455 mm
[18 inch] intervals.
2. Turn electrical supply "Off" when machine is not
in use.
3. Reload and thread tape as necessary.
4. Be sure machine is cleaned and lubricated
according to recommendations in "Maintenance"
section of this manual.
Operation (Continued)
Notes
1. Machine or taping head adjustments are
described in "Adjustments", Section
I
for
machine or Section
II
for taping heads.
2. Box drive motors are designed to run at
a moderate temperature of 40°C [104°F].
In some cases, they may feel hot to the
touch.