E6581301
11
K-30
[29] Communication function [1/4] Sensorless vector/vector with sensor (Ɣ:Effective, -:Ineffective)
Title
Communi
cation
No.
Function Adjustment range
setting unit
(Panel/Communi
Default
setting
running
PM
control
V/f Constant
Reference
Speed
control
Torque
control
H
MAC address
H
H
H
H
H
H
Device name
H
H
H
H
H
H
H
H
0800
Communication speed (2-wire
RS485)
0:9600 bps
1:19200 bps
2:38400 bps
1/1 1 Enabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ 6. 39. 1
H
0801 Parity (2-wire RS485)
0:Non parity
1:Even parity,
2:Odd parity
1/1 1 Enabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ 6. 39. 1
H
H
0803
(common to 2-wire RS485 and
0:OFF, 1~100 sec. 1/1 0 Enabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ 6. 39. 1
H
0804
(common to 2-wire RS485 and
4-wire RS485)
0~8 1/1 8 Enabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ 6. 39. 1
H
0805
0.00:Default, 0.01~2.00 sec. 0.01/0.01 0.00 Enabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ 6. 39. 1
H
0806
Master/slave setting for
inverter-to-inverter
communications (2-wire RS485)
ave (issues a 0Hz command if something
goes wrong with the master)
1:Slave (continues operation if something goes
wrong with the master)
2:Slave (trips for emergency stop if something
goes wrong with the master)
3:Master (sends a frequency command)
4:Master (sends an output frequency)
5.Master (sends a torque command)
6.Master (sends an output torque command)
1/1 0 Enabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ 6. 39. 1
H
0807
1/1 0 Enabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ 6. 39. 1
*1: This parameter is Read only.
*2:This function is for Etherenet communication option.(planning)
