K-13
E6581301
11
[14] Functions for lift [1/2] Sensorless vector/vector with sensor (Ɣ:Effective, -:Ineffective)
Title
Communi
cation
No.
Function Adjustment range
setting unit
(Panel/Communi
cation)
Default
setting
running
PM
control
V/f Reference
Speed
control
Torque
control
H
0328
Light-load high-speed operation
selection
1:High-speed operation speed set automatically
(Power running at F command: Increase)
2:High-speed operation speed set automatically
(Power running at R command: Increase)
3:High-speed operation speed set with H
(Power running at F command: Increase)
4:High-speed operation speed set with H
1/1 0 Disabled Ɣ/Ɣ - Ɣ Ɣ *1
H
0329
Light-load high-speed learning function
1/1 0 Disabled Ɣ/Ɣ - - - *1
H
0330
operation frequency
30.0~WN Hz 0.1/0.01 *2 Enabled Ɣ/Ɣ - Ɣ Ɣ *1
H
0331
switching lower limit frequency
5.0~WN Hz 0.1/0.01 40.0 Enabled Ɣ/Ɣ - Ɣ Ɣ *1
H
0332
load waiting time
0.0~10.0 sec. 0.1/0.1 0.5 Enabled Ɣ/Ɣ - Ɣ Ɣ *1
H
0333
0.0~10.0 sec. 0.1/0.1 1.0 Enabled Ɣ/Ɣ - Ɣ Ɣ *1
H
0334
heavy load detection time
0.0~10.0 sec. 0.1/0.1 0.5 Enabled Ɣ/Ɣ - Ɣ Ɣ *1
H
0335
Switching load torque during
-250~250% 1/0.01 50 Enabled Ɣ/Ɣ - Ɣ Ɣ *1
load torque during power running
H
0337
-250~250% 1/0.01 50 Enabled Ɣ/Ɣ - Ɣ Ɣ *1
H
0338
Switching load torque during
-250~250% 1/0.01 50 Enabled Ɣ/Ɣ - Ɣ Ɣ *1
H
0341 Braking mode selection
1/1 0 Disabled Ɣ/Ɣ - - - 6. 17
H
0342
Load portion torque input
selection
1:VI/II (voltage/current input)
2:RR/S4 (potentiometer/voltage input)
3:RX (voltage input)
4:Henabled
5:2-wire RS485 communication input
6:4-wire RS485 communication input
7:Communications option input enabled
1 (differential current input)
1/1 4 Enabled Ɣ/Ɣ - - - 6. 17
H
0343
Hoisting torque bias input (valid
only when H=)
-250~250% 1/0.01 100 Enabled Ɣ/Ɣ - - - 6. 17
Lowering torque bias multiplier
*1: For details, refer to Instruction Manual (E6581327) specified in Section 6.42. *2: Inverter with a model number ending with -WN, HN: 60.0 -WP: 50.0
