K-25
E6581301
11
[26] Override Sensorless vector/vector with sensor (Ɣ:Effective, -:Ineffective)
Title
Communi
cation
No.
Function Adjustment range
setting unit
(Panel/Communi
cation)
Default
setting
running
PM
control
V/f Constant
Reference
Speed
control
Torque
control
H
0660 Override addition input selection
1:VI/II (voltage/current input)
2:RR/S4 (potentiometer/voltage input)
3:RX (voltage input)
4:Operation panel input enabled (including
LED/LCD option input)
5:2-wire RS485 input enabled
6:4-wire RS485 input enabled
7:Communications option input enabled
8:Optional AI1 (differential current input)
9:Optional AI2 (voltage/current input)
10:Motor operated pot mop setting
11:Optional RP pulse input
12:Optional high-speed pulse input
13:-
1/1 0 Enabled Ɣ/Ɣ - Ɣ Ɣ 6. 34
H
0661
Override multiplication input
0:Disabled, 1:VI/II, 2:RR
H
1/1 0 Enabled Ɣ/Ɣ - Ɣ Ɣ 6. 34
H
0665 Ground fault detection selection
1:No detection
1/1 0 Disabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ 6.33.25
H
0669
Logic output/pulse output
selection (OUT1)
0:Logic output
1:Pulse output
1/1 0 Disabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ 6. 35. 1
COUN
AM terminal meter selection
This parameter moves to a fundamental parameter.
*1: For the adjustment range, see the table on page K-40.
[27] Meter output [1/2] Sensorless vector/vector with sensor (Ɣ:Effective, -:Ineffective)
Title
Communi
cation
No.
Function Adjustment range
setting unit
(Panel/Communi
Default
setting
running
PM
control
V/f Constant
Reference
Speed
control
Torque
control
CO
AM terminal meter adjustment
H
MON1 terminal meter selection
H
0673
- 1/1 - Enabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ *2
H
MON2 terminal meter selection
H
0675
- 1/1 - Enabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ *2
H
Pulse output function selection
H
Selection of number of pulses
H
Constant at the time of filtering
This parameter moves to a fundamental parameter.
*1: For the adjustment range, see the table on page K-39.
*2: For details, refer to Instruction Manual (E6581341) specified in Section 6.42.
