E6581301
11
K-8
[5] V/f 5-point setting Sensorless vector/vector with sensor (Ɣ:Effective, -:Ineffective)
Title
Communi
cation
No.
Function Adjustment range
setting unit
(Panel/Communi
Default
setting
running
PM
control
V/f Reference
Speed
control
Torque
control
H
0190
0.0~HJ Hz 0.1/0.01 0.0 Disabled - - - Ɣ 5. 6
H
point setting VF1 voltage
H
0192
0.0~HJ Hz 0.1/0.01 0.0 Disabled - - - Ɣ 5. 6
H
H
0194
frequency
0.0~HJ Hz 0.1/0.01 0.0 Disabled - - - Ɣ 5. 6
H
point setting VF3 voltage
H
0196
0.0~HJ Hz 0.1/0.01 0.0 Disabled - - - Ɣ 5. 6
H
point setting VF4 voltage
H
0198
0.0~HJ Hz 0.1/0.01 0.0 Disabled - - - Ɣ 5. 6
H
point setting VF5 voltage
[6] Speed/torque reference gain/bias setup [1/2] Sensorless vector/vector with sensor (Ɣ:Effective, -:Ineffective)
Title
Communi
cation
No.
Function Adjustment range
setting unit
(Panel/Communi
Default
setting
running
PM
control
V/f Reference
Speed
control
Torque
control
H
0200 Frequency priority selection
HOQF
H
terminal switching (input
terminal function selection 104, 105)
1:HOQF/H frequency switching (switching
H
1/1 0 Enabled Ɣ/Ɣ - Ɣ Ɣ 6. 6. 1
H
VI/II input point 1 setting
H
VI/II input point 1 frequency
HJ
H
VI/II input point 2 setting
CKH
VI/II input point 2 frequency
HJ
H
0~250% (for torque control etc.)
H
0~250% (for torque control etc.)
H
0207
selection 2
Same as HOQF (1~13) 1/1 Ძ Disabled Ɣ/Ɣ - Ɣ Ɣ 6. 6. 1
H
0208
0.1~HJ Hz 0.1/0.01 0.1 Enabled Ɣ/Ɣ - Ɣ Ɣ 6. 6. 1
H
0209 Analog input filter
0:No filter
1:Filter approx. 10ms
2:Filter approx. 15ms
3:Filter approx. 30ms
1/1 0 Enabled Ɣ/Ɣ Ɣ/Ɣ Ɣ Ɣ 7. 2. 4
H
H
HJ
This parameter moves to a fundamental parameter.
*1: Inverter with a model number ending with -WN, HN: 60.0 -WP: 50.0
*2: For details, refer to Instruction Manual (E6581331) specified in Section 6.42.
