A SERVICE OF

logo

Open as PDF
next previous
G-9
Network Out-of-Band Management (OOBM)
Tasks
OOBM port enable/disable
The OOBM interface command enables or disables the OOBM interface (the
OOBM port, as opposed to the OOBM function).
Syntax:
From the OOBM context:
interface [enable | disable]
From the general configuration context:
oobm interface [enable | disable]
Enables or disables the networked OOBM interface (port).
For example:
ProCurve (oobm)# interface enable
ProCurve (config)# oobm interface disable