F-2
Daylight Savings Time on ProCurve Switches
Middle Europe and Portugal:
• Begin DST at 2am the first Sunday on or after March 25th.
• End DST at 2am the first Sunday on or after September 24th.
Southern Hemisphere:
• Begin DST at 2am the first Sunday on or after October 25th.
• End DST at 2am the first Sunday on or after March 1st.
Western Europe:
• Begin DST at 2am the first Sunday on or after March 23rd.
• End DST at 2am the first Sunday on or after October 23rd.
A sixth option named “User defined” allows you to customize the DST config-
uration by entering the beginning month and date plus the ending month and
date for the time change. The menu interface screen looks like this (all month/
date entries are at their default values):
Figure F-1. Menu Interface with “User-Defined” Daylight Time Rule Option
===========================- TELNET - MANAGER MODE -============================
Switch Configuration - System Information
System Name : ProCurve 6120 Blade Switch
System Contact :
System Location :
Inactivity Timeout (min) [0] : 0 MAC Age Time (sec) [300] : 300
Inbound Telnet Enabled [Yes] : Yes Web Agent Enabled [Yes] : Yes
Time Sync Method [None] : TIMEP
TimeP Mode [Disabled] : Disabled
Tftp-enable [Yes] : Yes Jumbo Max Frame Size [9216] : 9216
Time Zone [0] : 0
Daylight Time Rule [None] : User-defined
Beginning month [April] : April Beginning day [1] : 1
Ending month [October] : October Ending day [1] : 1
Actions-> Cancel Edit Save Help
Edit the fields displayed above.
Use arrow keys to change action selection and <Enter> to execute action.
Select User-defined and press [v] to
display the remaining parameters.
