4. Use the Micro Feed buttons to feed the paper to the
desired top-of-form position. The red line on the ribbon
protector shows you where the bottom edge of your first
line of text will print. This position is based on the first
printable line of text. If your software inserts a top margin
of five lines, your text will actually print five lines below
the top-of-form position.
Note:
The red line on the ribbon protector can be used as a reference
only when you are in top-of-form mode. At all other times your
top-of-form position is hidden behind the print ribbon.
5. Press the TOF button again to exit and save your new
top-of-form position. Then close the top cover.
Note:
If you enter top-of-form mode right after loading paper, you can set
the loading and top-of-form positions at the same time. (When you
use the optional pull tractor, you cannot adjust the loading position.)
d-2-12
3
R
Peony Rev.C
A5 size Chapter 3
98/01/07 Pass 4
Paper Handling 3-19
