A SERVICE OF

logo

Open as PDF
next previous
2. Close the paper separator cover and position the output tray
on the output attachment to accommodate the page length
of paper you use:
You are now ready to use the perforation cutter as described in
the next section.
c
Caution:
T You cannot open the top cover while the perforated paper
output attachment and the output tray is attached. If you
want to open the top cover, you need to remove them first.
T When you are ready to reload the paper onto the rear
tractor, first remove the perforation cutter. See “Removing
the perforation cutter” later in this chapter.
second step: less than 9 inches
fourth step: 12 inches or more
third step: 10 to 11 inches
cutter2
output tray
6-3
6
R
Peony Rev.C
A5 size Chapter 6
98/01/07 Pass 4
Using Printer Options 6-17