Installing the printer driver using plug-and-play
If your computer has an IEEE-1284 compatible, bidirectional
parallel port, you can install the printer driver using the
Windows 95 plug-and-play feature. See your computer
documentation for more information.
1. Make sure the printer is connected to your computer as
described on page 1-11.
2. First turn on your printer and then turn on the computer.
Your computer starts loading Windows 95.
3. If you use a password, enter it at the prompt. You see the
New Hardware Found screen.
Note:
If you do not see the New Hardware Found screen, or if you
run into any kind of problem, click Cancel and follow the
instructions under “Installing the printer driver using My
Computer” on page 2-3.
4. Make sure the screen displays your printer model name.
Then click the Driver from disk provided by hardware
manufacturer radio button.
Note:
The next time you turn on your computer after you install the
driver, Windows 95 may display the New Hardware Found
screen again. If this happens, select the Do not install a driver
radio button and then click OK. This screen will not appear again.
5. Click OK. You see the Install From Disk screen.
6. Insert Disk 1 of your printer driver software in a disk drive.
7. If you inserted the disk in drive A, type “Win95” and click
OK. Otherwise, change the drive letter in the Copy
manufacturer’s files from box and click OK.
L
Peony Rev.C
A5 size Chapter 2
98/01/07 Pass 4
2-4
Setting Up Your Software
