Paper menu
T Paper size Select the size of the paper loaded in the printer.
If you don’t see your paper size, use the scroll
bar to scroll through the list. If your paper size
is not included in the list, click Custom and
enter the correct paper size in the dialog box
that appears.
T Orientation Select Portrait or Landscape.
T Paper source Select the paper source that best meets your
needs. There are three cutting method options
for both the front and rear tractors in the
Paper source list if the optional perforation
cutter is installed. For details, see “Using the
Perforation Cutter” in Chapter 6.
Graphics menu
T Resolution Click the printing resolution you want.
T Dithering You can leave this option set to Fine, which is
the default setting, or select another dithering
pattern, depending on the kind of printout you
want. The display to the left of the dithering
options shows the effect of each setting.
T Intensity Move the slider to make your printout lighter
or darker.
After you’ve checked your printer driver settings, you are
ready to print. If you have any problems while printing, see
Chapter 8 for troubleshooting guidelines.
2
R
Peony Rev.C
A5 size Chapter 2
98/01/07 Pass 4
Setting Up Your Software 2-7
