Using the Paper Cutter
The optional paper cutter (C81500@) makes using continuous
paper easier by cutting off your printed documents for you.
When you use the paper cutter, be sure to set the page length
to match your paper using either your software or the printer’s
DIP switchs (described in Chapter 4).
c
Caution:
T
Do not use the paper cutter to cut the perforation. If you
want to cut the perforation of your document, use the
optional perforation cutter (C81507@).
T
Do not use more than 6 sheets (1 original + 5 copies) of
continuous paper.
T
Do not use multi-part forms that vary in thickness with
the optional paper cutter. This includes forms with labels
on them and forms that overlap slightly where they are
glued together.
Installing the paper cutter
Follow the steps below to install the paper cutter.
Note:
If you plan to use the paper cutter with the built-in rear tractor, you
need to load paper onto the rear tractor before you install the paper
cutter. See “Loading Paper onto the Rear Tractor” in Chapter 3.
L
Peony Rev.C
A5 size Chapter 6
98/01/07 Pass 4
6-24
Using Printer Options
